Black Bitumen Paint Weatherproof Protection Metal Railing Tanks Wood Felt Roofs 901

Description:

Everbuild 901 black Bitumen Paint solvent based full bodied black bitumen paint,

Provides an effective waterproof, weatherproof, corrosion resistant protective coating

Suitable for the protection of metals, concrete roofing, felt, fibre cement,

corrugated iron, asphalt & wood against water attack.

Fast drying.

Resistant to low concentrations of alkalis and acids and can withstand

prolonged oxidation

Metal protection – corrugated iron sheets, fire escapes, stairways, ladders,

storage tanks, gutters, down pipes, fences, railings, gates etc.

As a protective coating for concrete structures, stone, brick, concrete screeds

and sand cement surfaces.

Overcoating felt wood.

Product Application

EVERBUILD BLACK BITUMEN PAINT is ready for use and should not be thinned.

Apply by Paint brush or spray decant only the amount of paint that you can use in

one go into a clean paint kettle and refit the lid back on to the tin.

A minimum of two coats of Bitumen Paint is required, the first coat been allowed

to dry this normally takes 2 to 4 hours depending on weather conditions before

the second coat of paint is applied.

Size 1 litre, 2.5 litre & 5 litre.

Black Bitumen Paint is a solvent based, full bodied black bituminous paint.

When dry, the product forms an odourless and taint free black film.

Suitable for metal protection, and over coating wood and felt.

Conforms to the requirements of BS 3416 1991, Type 1, Class A.

Product Description

EVERBUILD BLACK BITUMEN PAINT is a solvent based, full bodied black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against water attack.

Benefits

Fast drying.

For use on most common building surfaces.

Areas For Use

BLACK BITUMEN PAINT provides an effective waterproof, weatherproof, corrosion resistant protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. It is suitable for application to a wide variety of materials including iron and steel, lead, zinc, aluminium, asbestos – cement, concrete, stone, wood, felt and brick and is mainly used for:

Metal protection – corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, down pipes, fences, railings, gates etc.

As aprotective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces.

Overcoating felt/wood.

Surface Preparation

As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating, All surfaces must be sound, stable and thoroughly clean and dry. Metal surfaces should be wire brushed to remove rust. Where long term protection is required an initial treatment of a rust inhibitive product such as red lead or zinc phosphate should be used. Loose or blistered paint should be removed as should tar based paint systems. New galvanised surfaces should be roughened with a wire brush or treated with a proprietary etch primer. Porous surfaces should be primed with EVERBUILD BITUMEN PRIMER

Application

EVERBUILD BLACK BITUMEN PAINT is ready for use and should not be thinned. Apply by brush or spray .

A minimum of two coats of Bitumen Paint should be applied, the first been allowed to dry (normally 2-4 hours depending on weather conditions) before the second is applied.

PROTECTIVE COATING ON CONCRETE ETC

Since concrete and some stone surfaces may be porous, an initial primer coat of EVERBUILD BITUMEN PRIMER should be applied.

CLEANING TOOLS

Tools may be cleaned by using white spirit. Spillage’s should be wiped off surfaces before the bitumen paint has set.

Specific Data

Type Of Solvent

White spirits

Flashpoint

40°

Specific Gravity @ 20°

0.9

Viscosity @ 20’C

700-1200cps

Coverage

4-“ 6m² per litre depending on porosity of substrate

11m² per litre on non porous surfaces

Drying Time

4-6 hours depending on drying conditions

Service Temps

-20 to +50°

Application Temps

5-50°. Surfaces must be free from ice and water

Film Thickness Per Coat @ 11m² / Ltr

Wet-“ 0.1mm

Dry-“ 0.05mm

Chemical And Water Resistance

Resistant to: most salt solutions, dilute acids and alkalis, water and alcohol.

Not resistant to: oils, solvents and some detergent solutions

Health & Safety

Consult MSDS for full list of hazards.

Storage

EVERBUILD BLACK BITUMEN PAINT contains a flammable solvent, and all normal precautions against fire must be taken during both storage and use. Store in original container in cool dry conditions. Keep away from sources of ignition.

Shelf Life

24 months from date of manufacture in tightly sealed, undamaged containers.

NOTE:- Picture is for illustration purpose only and Actual product colour & shape may slightly vary due to Computer screens variable colours and stock updates.