PLASTIDIP PLASTIC/RUBBER PAINT SPRAY CANS AEROSOL 311G BLACK MATT

 PLASTIDIP PLASTIC/RUBBER PAINT SPRAY CANS AEROSOL 311G BLACK MATT

Plasti Dip – The Original Peelable, Flexible, Insulating, Non-Slip, Durable, Rubber Coating!

Plasti Dip is an air dried flexible liquid matt coating for use on virtually anything!

PlastiDip resists alkaline, acids, salts, moisture, abrasion, and most chemicals, and is an insulating dielectric coating.It will not crack, chip or peel, and will remain flexible even under severe conditions (-34ºc to +93ºc).

PlastiDip can be dipped, brush coated and sprayed. Add more layers for greater protection and grip.

WOOD: Seals and protects from weathering, and prevents splitting.

METAL: Reduces vibration, deadens sound, and prevents corrosion.

GLASS: Shatter proofs glass objects

How To Spray

Spraying (aerosol)

Surface must be clean and dry. For best results, avoid direct sunlight, high humidity or breezy conditions.

Shake can vigorously for one full minute after mixing ball begins to rattle. Shake often while applying.

Hold can 6-10” from surface, moving can back and forth, slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance.

Allow 30 minutes minimum between coats. Apply as many coats as desired (3-4 average).

Allow 4 hours minimum dry time before use. Coverage: Approximately 5-10 sq. ft. per can.

Spraying Tips:

Always protect surrounding areas from over spray. Allow 4 hours per coat for complete dry. If runs or sags are experienced, move can further away from surface. To avoid clogged nozzle, turn can upside down and spray for 5 seconds. If clogged, remove nozzle and soak in naphtha or mineral spirits for 30 minutes. Do not stick pin or other objects into stem. Use naphtha, xylene (xylol), or toluene (toluol) for cleanup. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip. For best results, use a pumice (crystalline silica) grit. Results may vary with other grit additives. When applied properly Plasti Dip can be removed from most surfaces, if desired.

For best results;

Boil a kettle

Pour into a jug

Sit the can in the jug for a few minutes to warm it up

Dry can and shake well

Use as described leaving 10 mins between coats, 5 coats is best.

Leave overnight to dry and cure

Plasti Dip is a synthetic rubber based product and excellent for any automotive detailing projects such as coating your wheels, detailing interior parts, and many more applications. Plasti Dip® can also be used to coat wood, metal, glass, rope, plastic, rubber, concrete, tools, and just about anything else you can think of. This is the aerosol version, which has all the properties of Plasti Dip® in a spray format.

This product:

Exhibits excellent moisture, acid, alkaline, and abrasion resistance.

Protects against electrical shock, skidding, slipping, and corrosion.

Remains flexible and stretchy, and will not become brittle or crack even in extreme weather conditions.

NOTE:- Picture is for illustration purpose only and Actual product colour & shape may slightly vary due to Computer screens variable colours and stock updates.